
Between the harbor, the pier, and the hillside neighborhoods above the water, Redondo Beach gives Ipe decking a wide range of exposure conditions within just a few miles.
Harbor-adjacent Ipe surfaces often gray with a slightly darker, mottled look because moisture lingers in the grain and encourages mildew alongside UV bleaching, while hillside decks tend to fade to a more even silver-gray from steady sun exposure without as much surface mildew.

The overnight marine layer that makes Redondo Beach pleasant in August is hard on wood finishes. Boards get wet without rain, every night, for months. There is no downpour to rinse the salt off, just enough moisture to keep it active against the surface.
Because Ipe barely absorbs water, that moisture sits on top and evaporates in the morning sun, leaving behind concentrated salt and mineral deposits. Over a season those deposits abrade the finish like a very fine grit whenever anyone walks across the deck.
This is why we build a rinse step into every Redondo Beach maintenance plan. Plain fresh water, no soap, done before the deposits build up, measurably extends the life of an oil finish here.
Most of the damage we are called to correct came from maintenance, not neglect.
Film-forming products cannot key into Ipe's density. They sit on top, peel in sheets and have to be stripped.
It lightens the grey but breaks down fibres and strips the extractives that give Ipe its rot resistance.
Oil over trapped moisture goes cloudy and lifts. Ipe needs to be genuinely dry before anything goes on.
They trap condensation against the boards through winter and cause more damage than the weather would have.
Ipe accepts very little. Excess left to cure on the surface stays tacky and collects dirt all season.
On-site assessment of every board β condition, exposure, prior finish and any repairs needed.
Professional cleaning removes mildew, salt residue, sunscreen, oils and years of environmental buildup.
Multi-grit sanding down to fresh wood β the oxidized gray layer is removed, exposing rich color below.
A wood brightener neutralizes tannins and evens the tone across every board for a uniform finish.
Marine-grade Ipe oil is hand-applied in multiple coats, penetrating deep to seal against sun and salt.
Every square foot is inspected, edges detailed, and the site left cleaner than we found it.



Professional-grade cleaning of every board, joint and railing.
Multi-grit sanding to remove oxidation and prep for a flawless finish.
Marine-grade penetrating oils that restore and protect the wood.
Full restoration for decks that have been neglected for years.
Scheduled maintenance oiling to keep your deck showroom-ready year-round.
HOAs, restaurants, hotels and resorts β phased around your operations.
A look at recent Ipe refinishing projects β every deck hand-sanded and hand-oiled by our master craftsmen. See more on our full project gallery.








We also provide professional Ipe deck refinishing throughout nearby Southern California communities.
Near the ocean, three separate forces act on outdoor wood at once. Understanding which one is doing the damage changes how you maintain it.
Read guideFreshly restored teak needs very little. What it needs, it needs consistently.
Read guideSun does not just fade colour. It breaks down the material that holds wood fibres together, and it degrades the finish protecting them.
Read guide
Spring and early autumn book out first. A short call now usually means a better slot.
Send a photo with your details. We can usually tell you whether it is a recoat or a full refinish before we visit.